Concrete Resurfacing and Repair Sydney

KMA Concrete Constructions assesses damaged concrete honestly across Sydney. We have been doing this since 1999. Sometimes resurfacing is the right answer.

Sometimes a targeted repair is all that is needed. And sometimes the slab has failed structurally and the only sensible option is replacement. We will tell you which one applies before you spend anything.

What Are You Actually Looking At?

Before choosing a solution, identify what the damage is. Different problems require different approaches and applying the wrong fix wastes money.

Surface cracks that do not run through the full depth of the slab are usually a resurfacing or surface repair candidate. They are a cosmetic and surface integrity issue, not a structural one. If the slab beneath the cracks is still stable and level, resurfacing is often viable.

Cracking through the full depth suggests the slab has moved or the sub-base has failed. Resurfacing over a structurally compromised slab is money wasted – the new surface will crack along the same lines within months. This situation requires a proper assessment to determine whether removal and replacement is necessary.

Spalling is the flaking or pitting of the concrete surface, where chunks of the surface layer break away. It is caused by freeze-thaw cycles, chemical exposure or low-quality materials in the original pour. Surface spalling can be repaired with the right preparation and resurfacing product. Deep spalling that has exposed reinforcement steel is a more serious matter.

Concrete cancer is the term used when the reinforcement steel inside a concrete slab or structure has corroded and expanded, cracking and spalling the concrete from within. Rust staining on the surface is usually the first visible sign. Concrete cancer repair involves removing the damaged concrete, treating the corroded steel and restoring the surface with appropriate repair mortar. Left untreated, concrete cancer progressively worsens and can compromise the structural integrity of the slab or element.

Sunken or heaved sections indicate sub-base movement. The surface may look repairable but if the ground beneath has shifted, any surface fix will be temporary. KMA identifies sub-base issues before recommending any repair or resurfacing approach.

When Resurfacing Makes Sense

Concrete resurfacing applies a new layer over an existing structurally sound slab, restoring appearance and surface integrity without the cost and disruption of full demolition and replacement.

It is the right choice when the existing slab is level, stable and free of structural movement – but the surface is worn, stained, cracked at the surface level or simply outdated in appearance. Driveways, pathways, pool surrounds and outdoor entertaining areas that have aged but not failed structurally are good candidates.

KMA uses quality resurfacing systems applied over correctly prepared surfaces. Surface preparation is where most resurfacing jobs succeed or fail – a poorly prepared base means the new layer delaminates within months. We prepare the surface correctly before anything else goes on.

When Repair Is the Right Answer

Targeted concrete repair addresses specific areas of damage without resurfacing or replacing the entire slab. It is the most cost-effective solution when damage is localised – a section of cracked driveway, an area of spalling on a pathway or a concrete cancer repair on a structural element.

KMA carries out crack repairs, spalling repairs, concrete cancer treatment and localised slab repairs across Sydney for both residential and commercial clients. Every repair assessment starts with an honest look at whether the repair will hold given the underlying cause of the damage.

Resurfacing and Repair Across All Concrete Surfaces

KMA handles resurfacing and repair work across the full range of residential and commercial concrete surfaces in Sydney:

• Driveways – resurfacing worn or surface-cracked driveways without full replacement
• Pathways and footpaths – patching, crack repair and surface restoration
• Pool surrounds – resurfacing aged or damaged pool deck concrete
• Outdoor entertaining areas – restoring patios and alfresco slabs
• Commercial and industrial floors – floor repair and surface restoration for warehouse and factory environments
• Structural elements – concrete cancer treatment and repair on slabs, columns and balconies

What Does Concrete Resurfacing Cost in Sydney?

Cost depends on the size of the area, the condition of the existing surface, the preparation required and the resurfacing system used. A straightforward driveway resurfacing on a sound base costs significantly less than a job requiring extensive crack repair, grinding and preparation before the new surface can go down.

KMA provides honest, itemised quotes. Call 02 9054 3040 to discuss what you are looking at and get a straight answer on whether repair, resurfacing or replacement is the right option for your situation.

Serving Greater Sydney

KMA handles concrete resurfacing and repair jobs across all of metropolitan Sydney – residential and commercial.

View all areas we service

Part of a Broader Concreting Scope?

Resurfacing or repair work sometimes sits alongside new concrete installation on the same property. KMA handles both under the one scope – one crew, one quote, consistent quality across every part of the job.

View our complete range of concreting services

Talk to Someone Who Will Give You an Honest Answer

Call 02 9054 3040 and describe what you are looking at. You will speak to an experienced concreter who will tell you whether it needs repair, resurfacing or replacement – before you spend anything.

Request a Quote Online